DC DC Switching Controllers
Results:
12,252
Manufacturer
Series
Voltage - Supply (Vcc/Vdd)
Supplier Device Package
Frequency - Switching
Control Features
Package / Case
Duty Cycle (Max)
Operating Temperature
Topology
Applications
Voltage - Supply
Voltage - Output
Voltage - Input
Voltage - Output (Min/Fixed)
Current - Output
Number of Outputs
Voltage - Input (Max)
Serial Interfaces
Current - Supply
Output Phases
Voltage - Input (Min)
Voltage - Output (Max)
Output Type
Output Configuration
Function
Qualification
Voltage - Start Up
Fault Protection
Voltage - Output 1
Duty Cycle
Voltage/Current - Output 2
Voltage/Current - Output 1
Type
Current - Output (Max)
Efficiency
Mounting Type
Power (Watts)
Current - Output / Channel
Voltage - Output 2
Dimming
Synchronous Rectifier
Grade
Features
Clock Sync
w/Supervisor
Output Isolation
Size / Dimension
Voltage Dropout (Max)
w/LED Driver
Frequency
Interface
Number of Regulators
Technology
Voltage - Isolation
w/Sequencer
Internal Switch(s)
Voltage - Supply (Max)
Current - Quiescent (Iq)
Voltage - Supply (Min)
Mode
Protection Features
Input Capacitance (Ciss) (Max) @ Vds
Gate Charge (Qg) (Max) @ Vgs
Voltage - On State (Vtm) (Max)
Current - Output Source/Sink
Gain Bandwidth Product
Current - Charging
Voltage - Collector Emitter Breakdown (Max)
Voltage - Threshold
EEPROM Size
Voltage - DC Reverse (Vr) (Max)
Control Interface
Programmable Features
Current - Average Rectified (Io)
Operating Temperature - Junction
IGBT Type
Test Condition
Voltage - Output 3
Current - Collector (Ic) (Max)
Voltage - Output 4
Number of Cells
Approval Agency
Current - On State (It (AV)) (Max)
Rds On (Max) @ Id, Vgs
Oscillator Type
Current - Reverse Leakage @ Vr
Current - Continuous Drain (Id) @ 25°C
Data Converters
Impedance (Max) (Zzt)
Current - Output High, Low
Charge Current - Max
Power Dissipation (Max)
Voltage/Current - Output 3
Output
Battery Chemistry
Vgs (Max)
Voltage - Gate Trigger (Vgt) (Max)
Current - Gate Trigger (Igt) (Max)
Vce Saturation (Max) @ Ib, Ic
-3db Bandwidth
Number of I/O
Peripherals
Voltage - Input Offset
Vce(on) (Max) @ Vge, Ic
Power - Max
Voltage - Forward (Vf) (Max) @ If
Number of Circuits
DC Current Gain (hFE) (Min) @ Ic, Vce
Voltage - Supply Span (Max)
Program Memory Type
Reset Timeout
Load Type
Current - Input Bias
Drain to Source Voltage (Vdss)
Voltage - Off State
Transistor Type
Number of Elements
Amplifier Type
Reset
Current - Hold (Ih) (Max)
SCR Type
Frequency - Transition
Capacitance @ Vr, F
Battery Pack Voltage
PSRR
Logic Type
Voltage - Load
Voltage - Breakdown
Vgs(th) (Max) @ Id
Current - Collector Pulsed (Icm)
Gate Charge
Voltage - Supply Span (Min)
Standard Number
Core Size
Voltage - Zener (Nom) (Vz)
Connectivity
Drive Voltage (Max Rds On, Min Rds On)
Program Memory Size
Current - On State (It (RMS)) (Max)
Core Processor
Current - Off State (Max)
Reverse Recovery Time (trr)
FET Type
Current - Supply (Max)
Current - Peak Output
Td (on/off) @ 25°C
Current - Startup
Current - Non Rep. Surge 50, 60Hz (Itsm)
Speed
Input Type
FET Feature
Number of Bits per Element
Switching Energy
RAM Size
Tolerance
Slew Rate
Rds On (Typ)
Standards
Number of Voltages Monitored
Current - Collector Cutoff (Max)
Results remaining：12,252
About DC DC Switching Controllers
DC-DC switching controllers refer to a type of ICs designed for power management applications. These controllers are specifically used for regulating voltage levels in electronic circuits by converting the input supply voltage to a desired output voltage level. They are commonly employed in high-efficiency circuits where it is necessary to generate output voltages that are either higher (boost or step-up) or lower (buck or step-down) than the input supply voltage. DC-DC switching controllers utilize switching techniques to efficiently convert the input voltage to the desired output voltage level. Unlike linear regulators that dissipate excess voltage as heat, these controllers minimize power loss and heat generation, resulting in improved overall system efficiency. They are capable of achieving higher efficiency levels compared to linear regulators, making them suitable for applications with limited power budgets or battery-powered devices. These controllers can be configured in various topologies such as buck-boost, flyback, forward, cuk, SEPIC, full bridge, half bridge, and push-pull, allowing flexibility in generating different output voltage levels based on specific requirements. This versatility makes them widely applicable in power supplies, computer systems, telecommunications equipment, automotive electronics, and more. In summary, PMIC DC-DC switching controllers are ICs used for power management tasks. They efficiently regulate voltage levels by converting the input supply voltage to a desired output voltage level. Their switching techniques offer higher efficiency compared to linear regulators, making them suitable for various applications where energy efficiency is crucial.
Need a quick quote?
Tell us what you're after