Drivers, Receivers, Transceivers
Results:
20,473
Manufacturer
Series
Supplier Device Package
Package / Case
Voltage - Supply
Data Rate
Protocol
Operating Temperature
Receiver Hysteresis
Number of Drivers/Receivers
Type
Current - Supply
Current - Output High, Low
Applications
Frequency
Output Type
Interface
Function
Data Rate (Max)
Logic Type
Number of Outputs
Number of Inputs
Current - Receiving
Ratio - Input:Output
Output
Input
Sensitivity
Circuit
Delay Time
Output Configuration
Features
Current - Transmitting
Input Type
Number of Bits per Element
Dimming
Modulation or Protocol
Modulation
Current - Output (Max)
Current - Output / Channel
Voltage - Output
RF Type
Current - Modulation
Current - Bias
Power - Output
Duplex
Voltage - Supply (Vcc/Vdd)
Number of Channels
Topology
Switching Temperature
Fault Protection
Configuration
Data Interface
Capacitance - Input
Frequency - Max
Voltage - Supply, Digital
Digits or Characters
Number of Circuits
Voltage - Supply, Analog
Display Type
Number of Elements
Voltage - Load
Mounting Type
Secondary Attributes
Voltage - Supply (Min)
Rds On (Typ)
Channel Type
Max Propagation Delay @ V, Max CL
Independent Circuits
Qualification
Current - Quiescent (Max)
Switch Type
Differential - Input:Output
Technology
Antenna Connector
Gain
Voltage Supply Source
Current - Peak Output
Internal Switch(s)
Voltage - Supply (Max)
Supply Voltage
RF Family/Standard
Standards
With False Start Bit Detection
Serial Interfaces
Crosstalk
Current - Output Source/Sink
Voltage - Collector Emitter Breakdown (Max)
Voltage - Supply, Dual (V±)
Channel Capacitance (CS(off), CD(off))
Signal Conditioning
On-State Resistance (Max)
Control Interface
Number of Bits
Multiplexer/Demultiplexer Circuit
Switch Time (Ton, Toff) (Max)
Logic Voltage - VIL, VIH
Current - Collector (Ic) (Max)
Current - Peak Output (Source, Sink)
Translator Type
Input Logic Level - High
With Modem Control
Current - Leakage (IS(off)) (Max)
Rise / Fall Time (Typ)
FIFO's
Vce Saturation (Max) @ Ib, Ic
Input Logic Level - Low
Switch Circuit
DC Current Gain (hFE) (Min) @ Ic, Vce
Load Type
Gate Type
Transistor Type
Voltage - VCCA
Voltage - VCCB
Driven Configuration
Grade
Channels per Circuit
Noise Figure
P1dB
With Auto Flow Control
Number of Drivers
With IrDA Encoder/Decoder
Clock Frequency
Current - Peak Pulse (10/1000µs)
Baud Rates
Count Rate
Power - Peak Pulse
Test Frequency
Unidirectional Channels
Delay Time - Propagation
Utilized IC / Part
LO Frequency
Input Capacitance
Hysteresis
Propagation Delay (Max)
Number of Cells
Antenna Type
Voltage - Supply, Single/Dual (±)
Timing
Current - Input Bias (Max)
CMRR, PSRR (Typ)
Input Signal
Non-Volatile Memory
Trigger Type
Current - Output (Typ)
Direction
Channel-to-Channel Matching (ΔRon)
Voltage - Reverse Standoff (Typ)
Battery Chemistry
Charge Injection
Power Line Protection
Data Format
Motor Type - AC, DC
On-Chip RAM
Synchronous Rectifier
-3db Bandwidth
Voltage - Supply, Single (V+)
Power - Max
Voltage - Core
Trip Temperature Threshold
Voltage - I/O
Step Resolution
High Side Voltage - Max (Bootstrap)
Reset
Frequency - Transition
Motor Type - Stepper
Selectable Hysteresis
Voltage - Input Offset (Max)
Control Features
Power (Watts)
Clock Rate
RF Frequency
Output Phases
Memory Size
Output Signal
Output Function
Current - Output
Voltage - Breakdown (Min)
PLL
Accuracy
Voltage - Clamping (Max) @ Ipp
Frequency - Switching
Bidirectional Channels
Current - Quiescent (Iq)
Capacitance @ Frequency
Slew Rate
Clock Sync
GPIO
Duty Cycle (Max)
Divider/Multiplier
Current - Collector Cutoff (Max)
Results remaining：20,473
About Drivers, Receivers, Transceivers
In the context of electronic communication and data transmission, "Interface - Drivers, Receivers, Transceivers" refers to essential components that facilitate the exchange of digital signals between different parts of a system or between multiple systems. These components play crucial roles in ensuring the integrity and reliability of data transmission across various types of interfaces such as serial communication, Ethernet, USB, and more. Drivers: In the realm of electronics, a driver is a component that amplifies the electrical signals generated by the transmitter before they are transmitted over a communication channel. The primary function of a driver is to boost the strength of the signal to a level where it can be effectively transmitted over long distances or through other electronic components without significant loss or distortion. Receivers: Receivers, on the other hand, are responsible for capturing and interpreting the incoming electrical signals from the communication channel. They typically include circuitry for signal conditioning, noise filtering, and signal detection. The receiver's task is to accurately interpret the incoming signals and convert them into a format that can be understood and processed by the receiving system or device. Transceivers: A transceiver combines the functionalities of both a transmitter and a receiver within a single device. This integrated component enables bidirectional communication, allowing a system to both transmit and receive data over the same communication channel. Transceivers are commonly used in applications where full-duplex communication is required, such as in Ethernet networks and wireless communication systems. These interface components are fundamental in enabling seamless and reliable data transmission across various types of electronic communication interfaces. They are utilized in a wide range of applications, including telecommunications, networking, industrial automation, and consumer electronics, among others. Proper design and implementation of drivers, receivers, and transceivers are critical for ensuring the overall performance, efficiency, and robustness of digital communication systems.
Need a quick quote?
Tell us what you're after