Signal Switches, Multiplexers, Decoders
Results:
9,528
Manufacturer
Series
Supplier Device Package
Package / Case
Voltage - Supply
Circuit
Current - Output High, Low
Switch Time (Ton, Toff) (Max)
Channel Capacitance (CS(off), CD(off))
On-State Resistance (Max)
Crosstalk
Type
Voltage - Supply, Single (V+)
-3db Bandwidth
Charge Injection
Channel-to-Channel Matching (ΔRon)
Switch Circuit
Operating Temperature
Switching Temperature
Current - Leakage (IS(off)) (Max)
Applications
Features
Voltage - Supply, Dual (V±)
Current - Supply
Output Function
Multiplexer/Demultiplexer Circuit
Accuracy
Output Type
Current - Output (Max)
Max Propagation Delay @ V, Max CL
Function
Current - Quiescent (Iq)
Number of Circuits
Interface
Independent Circuits
Number of Channels
Fault Protection
Logic Type
Current - Output
Rds On (Typ)
Number of Outputs
Sensing Temperature - Local
Test Condition
Output
Trip Temperature Threshold
Topology
Voltage - Load
Mounting Type
Power (Watts)
Resolution
Output Configuration
Voltage Supply Source
Voltage - Supply (Max)
Accuracy - Highest (Lowest)
Sensor Type
Number of Bits
Switch Type
Voltage - Input (Min)
Selectable Hysteresis
Voltage - Input (Max)
Voltage - Output (Min/Fixed)
Ratio - Input:Output
Standards
Configuration
Control Interface
Number of Cells
Qualification
Voltage - Supply, Single/Dual (±)
Charge Current - Max
Battery Chemistry
Voltage - Supply (Vcc/Vdd)
Synchronous Rectifier
Voltage - Output (Max)
Frequency
Sensing Temperature - Remote
Number of Elements
Battery Pack Voltage
Grade
Internal Switch(s)
Frequency - Switching
Supply Voltage
Input Type
Number of Bits per Element
Voltage - Supply (Min)
Slew Rate
Data Interface
Current - Max
Current - Charging
Number of Inputs
Test Frequency
Delay Time - Propagation
Voltage - DC Reverse (Vr) (Max)
Programmable Features
Current - Average Rectified (Io)
Operating Temperature - Junction
Sampling Rate (Per Second)
IIP3
Insertion Loss
Delay Time - ON
Current - Reverse Leakage @ Vr
Dimming
Impedance
Number of A/D Converters
Number of Taps
Sensing Method
Power Dissipation (Max)
Specifications
Ratio - S/H:ADC
Protocol
Voltage - Input
Voltage - Supply, Digital
Digits or Characters
Power - Max
Voltage - Forward (Vf) (Max) @ If
Resistance - Wiper (Ohms) (Typ)
Voltage - Peak Reverse (Max)
Temperature Coefficient (Typ)
Diode Type
Voltage - Supply, Analog
Memory Type
Resistance @ If, F
Display Type
Technology
Architecture
Capacitance @ Vr, F
Reference Type
Taper
Current - Output / Channel
Gain
Frequency Range
Reverse Recovery Time (trr)
FET Type
Auxiliary Sense
Voltage - Output
Resistance (Ohms)
Noise Figure
P1dB
RF Type
Delay Time - OFF
Speed
Tolerance
Isolation
Results remaining：9,528
About Signal Switches, Multiplexers, Decoders
Signal Switches, Multiplexers, and Decoders are electronic components used in digital circuits to control, route, and decode binary signals. These ICs are specifically designed to process and manipulate binary information, where data is represented as either a logic 0 or a logic 1. Logic signal switches are electronic switches that allow or block the flow of electrical signals within a digital circuit. They operate based on logical conditions and are used to connect or disconnect different parts of a circuit, enabling the control of signal paths and data flow. Multiplexers, also known as data selectors, are used to select one input signal from multiple input lines and route it to an output line. They function based on control inputs, allowing for efficient data routing and selection within digital systems. Multiplexers are commonly used in applications such as data transmission, memory addressing, and data bus management. Decoders, on the other hand, are ICs that take coded inputs and convert them into corresponding outputs based on predefined logic conditions. They are used to decode binary inputs and activate specific output lines based on the input combination. Decoders are frequently employed in address decoding in memory systems, enabling the selection of specific memory locations based on binary address inputs. These ICs are typically fabricated using integrated circuit technology, which involves the miniaturization of transistors, resistors, and other semiconductor components onto a single chip. This integration allows for compact and efficient devices with high processing capabilities. Integrated Circuits - Logic Signal Switches, Multiplexers, and Decoders are essential components in digital systems, serving critical roles in controlling signal paths, selecting data inputs, and decoding binary information. They are widely utilized in various electronic devices and systems, including computers, telecommunications equipment, consumer electronics, and industrial automation.
Need a quick quote?
Tell us what you're after